Current and voltage terminal block-plug-in Header-TD4-9.4Z-XX-LLRR
1.Jointlean patented product
2.Current side has the function of preventing CT from open circuit.
3.Suitable for the installation and use of 4U case.
4.The welding pin can be installed freely,which can realize the connection of the voltage loop terminal without open wire, convenient for the use of the welding voltage transformer.
5.The welding pin is a separate installation type, and can be installed with the optional poles, flexible and convenient. The flanges on both sides have the function of zero (ground) connection,no additional wiring is needed for PCB zero (ground) connection.
6.There is a removable insulation cover outside, which can realize the protection grade of the product up to IP20.
7.Extended line protection housing can be provided to increase the additional insulation of the product and the beauty of the overall layout.
8.This product is specially designed for use on transformer boards of relay protection devices and is suitable for other similar applications.
9.Seamless replacement with current and voltage terminal TD4 series of all 9.4mm pitch products.
10.It can meet the requirements of the former and the latter two installation modes.
Executive standard:
QB/EC 01.003C-2014 TD4-9.4N Technical conditions for AC current connectors
QB/EC 01.003D-2014 TD4-9.4N Technical conditions for AC voltage connectors
Up to the standard of the QB/EC 07.003-2018、GB/T14048.7-2016、GB13140.1-2008、JB/T7104-2007、IEC60998-1:20
<
<
021-62658708
Service