DMK10-1016

Fixed terminal blok-DMK10-1016

Number of connections：02p，03p

Pitch：10.16mm

Hole diameter：2.3mm

Pin dimensions：1.2x1.5mmxmm

wiring direction parallel to the PCB(With test hole)

Fixed terminal blokDMK10-1016

wiring direction parallel to the PCB(With test hole)，PCB suitable for high current

1. The product has obtained UL certification;

2. With splicing slot, 2-position and 3-position terminals can be freely spliced into large-digit terminals;

3. Large wiring capacity, which can connect the cross-sectional area to 16mm² Wire;

4. The input current value can reach 57A, which is suitable for PCB with high current;

5. The lifting wire pressing frame structure ensures the reliability of connection;

6. Various product colors can be customized and developed as required.

DMK10-1016图纸-min.png

DMK10-1016
wiring direction parallel to the PCB(With test hole)
Pitch [mm]	10.16
Hole diameter [mm]	2.3
Pin dimensions [mm]x[mm]	1.2x1.5
Technical data ，in accordance with IEC/DIN and VDE
Insulating material group	I
Surge voltage category/contamination class	III/3 III/2 II/2
Rated voltage [V]	690 1000 1000
Rated surge voltage [kV]	8 8 8
Nominal current/cross section [A]/[mm² ]	57/10
Maximum load current/Cross section [A]/[mm² ]	57/16
Capacity connection
Rigid conductor/Flexible conductor/Wire gauge [mm² ]/ [mm² ]/AWG	0.5-16/0.5-10/20-6
Flexible conductor with bare tubular/tubular pre-insulated tip [mm² ]	0.5-10/0.5-10
Multiple connection(2 conductors with same cross section)
Rigid/flexible conductor [mm² ]/ [mm² ]	0.5-4/0.5-4
Flexible conductor with bare tubular tip [mm² ]	0.5-2.5
Flexible conductor with tubular pre-insulated TWIN ferrule [mm² ]	0.5-6
Stripping length [mm]	10
Internal cylindrical gauge（IEC 60 947-1）	B6
Thread	M4
Torque [Nm]	1.2-1.5
Insulating material	PA
Inflammability class in acc.with UL 94	V0
Approva ldata（UL/CUL及CSA）
Rated voltage/current/conductor sizes UL/CUL:[V]/[A]/AWG	300/10/30-10
CSA: [V]/[A]/AWG
	Number of connections	Model
	02	DMK10-1016-02P
	03	DMK10-1016-03P

Tab：