TD2.5-8Z-XX-LLRR

TD2.5-8Z-XX-LLRR

1.It is suitable for miniaturization of distribution network.

2.Current side has the function of preventing CT from open circuit.

3.Narrow width, smaller space occupation. It is suitable for 5T(25.4mm) panel installation. Protection grade of the products is up to IP20.

4.The welding pin can be installed freely,which can realize the connection of the voltage loop terminal without open wire, convenient for the use of the welding voltage transformer.

5.The welding pin is a separate installation type, and can be installed with the optional poles, flexible and convenient. The flanges on both sides have the function of zero (ground) connection,no additional wiring is needed for PCB zero (ground) connection.

6.The product is a piecemeal structure, the current plate number of position and the piezoelectric plate number of position are optional, the current number of position can be selected according to the actuality.

7.The shell increases the skidproof stripe, increases the friction, and is easy to pull out the plug.

8.The plug is matched with the socket, and the fool-proofing structure can effectively prevent the plug from being misinstalled.

9.One side cover of the plug and socket is engraved with the word "base" to remind the plug-in direction.

10.It can meet the requirements of the former and the latter two installation modes.

Executive standard:

QB/EC 01.003A-2014 TD4-9.4 Technical conditions for AC current connectors

QB/EC 01.003B-2014 TD4-9.4 Technical conditions for AC voltage connectors

Up to the standard of the QB/EC 07.003-2018、GB/T14048.7-2016、GB13140.1-2008、JB/T7104-2007、IEC60998-1:2002 and UL1059C/UL486E