D1STC-635-32P

Pluggable screw-free connectors D1STC-635-32P

1.Jointlean patented products.

2.Suitable for 4U case, protection grade is up to IP20.

3.Narrow width, smaller space occupation. It can be used for 4T or 5T panel installation even after the installation of the extended assembly line protection shell.

4.High integrated density design,multiple functions,high signal density,so that the 4U case can accommodate 32 wiring bits,each wiring bit can meet the requirements of a single 1.5mm^2 or two 1mm^2.

5.Under the condition of full pin and signal, it is suitable for high voltage 220V circuit.

6.Wiring button is located on the outside of the shell, making wiring and sdiustment more convenient.There is no need to take out additional wiring.

7.Provide extended assembly line protection shell. Increase the product's additional insulation and aesthetic degree of the overall layout.

8.Special test tooling is provided.

9.Some plugs are equipped with pull handles for esay pulling out from the socket.

Executive standard：

Up to the standard of the QB/EC 07.003-2018、GB/T14048.7-2016、GB13140.1-2008、JB/T7104-2007、IEC60998-1:2002 and UL1059C/UL486